I've never seen one. On the principle that anything can be accomplished if you really try, here is my brief analysis:
1. Figure out a way to hold a 35mm film cassette centered in the right-hand film well.
2. Modify a take-up spool to accept the film AND keep it aligned.
3. Since there's no backing paper, you're left guessing how much film to wind between shots.
4. You reach the end of the roll... You either attach a rewind crank to the right-hand shaft, or you remove the film in a changing bag.
There may be more obstacles I haven't thought of, these are the obvious ones. 1 and 2 can be done. 3 and 4, in my opinion, make the whole operation not worthwhile.