Ilford MG filters
Hello Folks, once again I seek the wisdom of the net. The issue is Ilford Multigrade filters. I have had a set for a long time, and on the box is “Ilford Multigrade II”. They have been there for a long time because I was primarily a Kodak paper user. Now I use Ilford fiber and Ilford and Oriental Seagull RC paper. And with all the papers, probably 95% of my printing was done with grades 2 through 3 ½. But I was printing with Ilford recently and got the impression that printing with the 4 and 4 ½ filters actually gave lower contrast than printing with the 3 ½ filter. And I printed something with some old Kodak paper that I had in the freezer; I printed with a Kodak 4 ½ filter, and it was way higher contrast. Also, with higher number Ilford filters, I need less exposure. I either close down a stop, or I have to cut exposure time by about half. This is the opposite of the Kodak filters; more exposure is needed with higher number filters.
So what’s up with the apparent low contrast with the Ilford higher number filters? I notice this on both fiber and RC. Are my filters out of date; that is, is there a newer version around? I checked the B&H web site, and there is no designation on the filters. Any ideas out there?
Thanks in advance,