My carriers are the ones with no keeper...

I print up to 20x24 on my upright 45MX, so I hope to print between 30x40 to 40x50 on the projection enlarger. The CB7 has a focus motor that I plan to hook a rheostat type of switch onto so I can use a grain focuser as I toggle it.

I had a Aristo D2-HI in my 45MX but exposures were way too short...it's damn bright so I think it might work with the mural setup.

IC, I was talking about the lens to paper distance, not neg to lens. I figure I might need up to 8 feet of distance for the bigger prints. Polyglot, I really am after a dedicated mural enlarger so as interesting as the mirror sounds, I am going to have to stick to m planned workflow.