I just finished refurbishing a BHF for a Christmas present. I've done a couple in the past, but took extra care with this one. I also did the mini-flash that came with it. It was pretty rough inside but cleaned up like new. The body had an extraordinary amount of mold and grunge inside so I took out the shutter plate so I could give it a good scrub. Had never desoldered the flash contacts before but it, too, was pretty easy. Resolder job looks and works like new. I finished up the gift by replacing the flashbulbs, batteries and film in the original box and tucked an extra 620 spool inside. Should be a nice surprise.