Quote Originally Posted by Photo Engineer View Post
You can mix it in small batches using a portion of each part of the solution in question such as Developer, Bleach, Fix or Stab/Final Rinse.

You can use each solution one time and dump or you can use them several times by increasing the development times according to the chart on the Kodak web site. (This is a good exercise for the student! )

I suggest that you use a 1 - 2% Acetic Acid stop after the development step for uniformity, and I suggest a prewet.

Have fun.

PE, thanks. Ok, freestyle advertises this as a 10-roll kit, but if I do one of your suggestions, to use it only once, this is a 2-roll kit!! Their instructions don't say anything about increasing developing times when reusing.

I thought I was done buying my chemicals, but it looks like I need this acetic acid. I'll see if I can get it locally. If not, where can I get it and does it come under any other names?