I've had some degree of success with Kentmere VC Select. It is worth experimenting with bleach/redevelopment (tip: you need to over-expose quite a bit before developing to completion in the first developer). Using a copper bleach(*) produces some interesting colours, but you do have to watch the snatch point very carefully.

Copper bleach
Copper sulphate 5g
Sulphuric acid 30% (battery acid) 2ml
Sodium chloride 5g
Water to make 100ml

Always add acid to water.
In use, dilute one part stock to around ten parts water. Bleach back the print and redevelop in a dilute developer.