Thanks, just wanted to check and be sure. I find my 0.04 reading above base white is still a bit too grey so will probably go with 0.06 or 0.07 and see how they look on a print.
One more question if you don't mind . My Zonemaster does not transmit the 7 test print times to my Stopclock Pro via the 3.5mm jack. I am wondering if this is normal or if the later models have this feature.
Since I am now using a color head for MG printing on my main enlarger, I have a Zonemaster on order. The only thing I wish Richard had done with the Stopclock series is make a toggle for that 3.5mm jack in that when I am not using my Vario for compensated timing, I could plug the Zonemaster-II in and use it like the standard StopClock Pro. While I gain the compensated timer for my other enlargers using a cold light head, I lose out on the nice feature of being able to use the Zonemaster and Stopclock in tandem.
"I always put my fb prints in a filled aquarium on the wall.
No problem with dry down times..." APUG'r Willie Jan