Quote Originally Posted by Photo Engineer View Post
This indicates though that there was some other underlying problem such as too little agitation, too little solution in addition to the fact that there may have been no prewet. The stop will correct for the first two, but not the last.

PE
I can probably rule out a couple of the suspects. I ran the entire process on the Jobo, so the agitation was probably sufficient. I also can confirm prewet. This leaves the possibility of too little solution. I suppose that could have occurred; however, I attempted to measure the 270ml required for the Jobo tank I used. Is it possible the stop bath makes a difference because of the acidity level of the tap water in my area? Just thinking out loud here...