Here some examples. With the last two images I even used 'old' (2 weeks) Tetenal developer, was used already a few times. And I also had these problems when I developed at 38C in the Paterson tank by hand. Same issues as with the JOBO processed ones. So form some reasons I 'solved' it by developing at 30C by hand in the Paterson tank and no JOBO Processor.

Cut out from a 6x12 JOBO Processed at 38c



Full image 6x9 JOBO Processed at 38c (no problems here, compared to rest)



Cut out from a 6x12 JOBO Processed at 38c



Cut out from a 6x12 JOBO Processed at 38c



Full 6x12 and Paterson Processed by hand at 30C (no center point filter used on lens)



Full 6x12 and Paterson Processed by hand at 30C (no center point filter used on lens)


Full 6x12 and Paterson Processed by hand at 30C