They sure are hard to see on my monitor, but I can say that normally you do not need to use DW to mix the Stabilizer or the Final Rinse (which ever you use). If these are indeed drying marks, I suggest that you get a very soft sponge at the supermarket, and wet it in the stabilizer. Then, when the film is done with the stabilizer, you gently wipe the film down with the sponge to remove concentrations of the solution and leave the film reasonably "dry".
You may be able to save these by redoing a water wash, then Stab. Then use the sponge method. Sometimes though, the damage is done.