I can only speak for slightly wet RC prints but I was foolish enough to try and bring home these from the college darkroom before complete drying and they stuck to each other and the plastic sheet container.

It might be possible if you could build a box with separate layers such as a metal drying screen that takes at least 8x10 sheets or bigger and keeps each sheets separate from the others and then place such a screen in a cardboard or wooden box. Very cumbersome but with a car it should be possible.

Not sure how what a quick rinse then drying over an hour would do to the eventual washing process.

I take it you do not have developing and fixing equipment at home but only washing equipment.