Hi, Thank you for this information. The chart in Pinhole Assist are based on Arista official data which is scarse : (1 second -> 2x, 10 seconds -> 8x, 100 seconds ->16x).
The charts within PinholeAssist for Arista were made with this data, using linear interpolation. I should have used interpolation on the derivative
For t=2s, the 1st method gives 10 seconds, and the 2nd method 5 second.
For t=4s, the 1st method gives 28 seconds, and the 2nd method 16 second.
This is better, but still higher than your figures.
I will release an updated (with 2nd method) data file soon. I would like to distribute an alternate correction curve based on your data, if you authorize me to do so.