Hi to all. I'm still having problems with the C-41 kits. Some have a Blix which does not need a wash after the colour developer. Others have a separate bleach and fix bath, with a wash between them. My quick question is this, what would happen if the wash was omitted between the bleach and fix? I am not reusing the chemicals, so contamination of the fix by bleach is not a concern. The reason for the question is that my Jobo ATL-1000 does not allow for the wash between the bleach and fix on the C-41 standard cycle. It could be modified by ordering a new eprom from Jobo, presumeably at great expense.