Quote Originally Posted by mesantacruz View Post
as for an led... as has been mentioned almost any red led will probably do.. but if you have the chance to read specifications... i believe that anything around 660nm frequency would be considered safe, so if you have the opportunity to red the specifications, and have a choice, such an led, would be the best.
I quoted mesantacruz, but this question if for anyone:

I've gotten a whole lot of feedback when it comes to a "safelight" for the darkroom (developing & contact printing B&W prints on RC VC paper) from borrowing one to investing in a good one to purchasing red LEDs.

At this point, I'm heading towards buying a cheap source of red light which will act as a "safelight".

Here is what I have come up with so far:
(please comment on each one as you see fit to whether it will work or not and how many I will need)

http://www.amazon.com/gp/product/B00...A24U7YTI6UD0QV
and another look at the same bulb http://www.bulbrite.com/products_en_...m-E26-Base.php

This one looks promising: http://www.amazon.com/gp/product/B00...=ATVPDKIKX0DER
Something I found interesting.. is there much difference between the Satco bulb above for $3 and this "jr. safelight" they charge $17 for? http://www.bhphotovideo.com/c/produc...ed_Junior.html

I think this will be too bright: http://www.amazon.com/gp/product/B00...A2NVEKMQTGKOW8

And lastly, good old red and cheap LED lights: http://www.amazon.com/gp/product/B00...A3TNRVM8W04X84


Oh, and I'm still open for suggestions that don't include the above items(please include a link and/or where to obtain it)

-Thanks so much! (the final process for overview is still to come.. tomorrow or wed.)