Quote Originally Posted by sanking
Jeremy,

OK, for silver gelatin projection printing with VC papers, and assuming you are doing rotary processing (since you note that you are working with "unicolor rollers"), I recommend about 9.5 minutes at 70 degrees F for Ilford FP4+ (and/or PhotoWarehouse ASA 125 film) in Pyrocat-HD, 1:1:100 dilution.

This should get you very close to optimum negatives for your printing conditions. Of course, test before developing your "Moonrise over Hernandez" negatives.

Good luck.

Sandy King
sandy

any guidelines for starting times/speeds in trays for fp4, bpf200 or efkepl100? any advantage/disadvantage in giving continuous agitation as per typical tray development as opposed to your suggested 10" per minute?

thanks
lloyd