Best post so far. You have a an easily correctable problem. Alternat ideas on the glass idea is using Scotch Transparent Tape, or whatever the frosted tape is called, on a piece of small cheap picture-frame glass rubber banded to the film rails. as your groundglass, or use the groundglass itself from the finder, rubber banned against the film rails at infinity, then re-install the groundglass dull side down and check infitnity there too, That will tell you if you need to pop the front bezel off the camera and re-adjust the taking lens.
Originally Posted by jochen
Last edited by Tom1956; 07-22-2013 at 01:28 AM. Click to view previous post history.