A lead based solder paste if you can find it. Servisol Soldamop (a copper braid) for soaking up excess solder. Tppex is also useful for masking off areas that you don't want solder on.

Quote Originally Posted by BMbikerider View Post
As well as the solder you need a good acid based (Phosphoric)flux.
An acid flux such as Bakers Fluid is fine for plumbing jobs and tin work, but not on small electronic jobs. A rosin based flux is best, although modern industrial soldering lines have switched to a Citric Acid based flux now that lead has been phased out from most solders.