Originally Posted by Iridium
I will ask from the lab to give me a little bit of stabilizer.
Therefore, after loading the film on the reel, should I first immerse it in the water without wetting agent for a few minutes and then a final bath in the stabilizer mix before hanging it to dry?
Or maybe first try to "...remove the contaminants by gently wiping the non-emulsion side with a sponge barely moistened in distilled water"?
First wash the film after it comes out of the fix / blix. Then stabilizer. (Remove excess stabilizer at this stage if desired). Hang to dry.
"Make good art!"
- Neil Gaiman
"...the heart and mind are the true lens of the camera".
- Yousuf Karsh
"We are what we repeatedly do. Excellence, then, is not an act, but a habit".