Excellent advice. Masonite is a very good material to use for art ideas. The cut edges are not archival, so I would also recommend giving everything a good coat of gesso before mounting the print. You're going to end up w/ something quite heavy though. You could achieve the same result by mounting the print to a properly stretched and gessoed canvas or foam board if that's a concern. I've done a lot of painting on masonite and it works well, but again, I always gesso everything to seal the surface w/ an archival material first. If you use foam board all you need to do is mount the print directly to that, as it's normally sandwiched w/ acid free paper.
Last edited by momus; 10-08-2013 at 02:04 AM. Click to view previous post history.