I have always found Ilford MG Paper to be about G1 without a filter, it is always too soft for me. I use, out of preference, Kentmere and that is a G2 paper without a filter and a lot faster too. I have been in the darkroom this afternoon and made a 12x16 Fibre base print on Kentmere taken in dull(ish) weather and the print without the filter was just about OK so I did another with a 2.5 magenta filter and the difference, although very slight is better. I have tried to print this on Ilford resin coated before and not with a great deal off success and had to use a grade 3.5 to get anything close to what I have today.
Last edited by BMbikerider; 10-12-2013 at 12:35 PM. Click to view previous post history.