Hey Doc, i hope you've had some luck with your salt printing since you posted this question. I haven't had alot of practice with the zone system but since you haven't had any response I thought mine would be better than none. I am interested to explore the zone system for my salt prints but till now i have had quite good results by incident metering 2/3 stop over and then doubling the development. This method obviously goes against the idea of the zone system so I have found it tricky to understand how the zone system might be applied to salt printing. From what i've been taught the salt print needs a dense negative with plenty of information in the shadows and good density in the highlights. I'd be very interested to hear your thoughts/discoveries on this topic.
Sent from my iPhone using Tapatalk