"The wide angle enlarger lenses dont have fall of problems if using a diffuse light source"

Despite my original expectations to the contrary, my 60MM WA Componon works fine with my Omega B8 condenser enlarger, using the auxiliary condenser designed for a 75mm lens. I suspect it would also work with the 50mm "thick" aux. condenser, but I normally leave the 75mm "thin" one in place for smaller prints and can't see any reason to change it [I searched for months for that long-discontinued 75mm condenser and would rather not risk dropping it].

I used the WA lens for the first time recently to make all the prints for a solo show and was very pleased with the results.