Mission accomplished--thanks folks. Well, looks like a project--the bench was a home-made deal built into a wall & no way it would be moved-short of a sawzall and some pry bars....someone had removed the enlarger, and it was on it's side, so luckily all we had to do was manhandle it onto a cart we had and then get that out to our lift & up to the truck bed. Of course, we got back to our building and got a couple of more hands to help....took about 5 hours tops, including gettting lost on the way.....


Now we need to make a base for it, make a lensboard, and adapt an 8x10 coldlight....

Thanks again, if we ever get it up & running, I'll see if we can post a picture or two.

KT

my opinions only/not my employers