I think what we have here is a failure to understand RF and EMF. A freezer is not a capacitor - it is a wave guide. We have established that a freezer will suck up cosmic rays and I know it wont hold a charge or light my strobes. So - what frequency is YOUR freezer resonant? I have a small chest freezer - I figure somewhere around 500Mhz should be about right. Out here in the desert everyone is on cable - I only use HF myself and have concluded that if the film is stuck between two RF dampening turkeys - it will be ok and that will also lower the q of the waveguide and protect it from all foul radiation. I have noticed a tendency of my film to gobble up more of my time because of this but I will still enjoy this hobby with thanksgiving.