I recieved my chemicals for Pyrocat HD in the mail yesterday and mixed everything up. Today I ran a film test with J&C Classic 200 in order to determine the film speed in this developer. My tests indicate that the speed is about 100. The only problem is that I have no densitometer...only a 1 degree spot meter, which is what I ran the test with. So I sort of have two factors that could cause error: 1)using a spot meter and not a densitometer, and 2) being able to get only a visual channel reading and not a blue or UV one. So I was just wondering if others who use this film/dev combo have similar film speed results. Thanks for any insight!

BTW
I used the 2:2:100 dilution and will be printing on Azo.