These are pictures of my 20x24. I used a Kodak Master 8x10 as an inspiration. It has full movements: front rise/fall, shift, tilt, swing, and rear tilt, swing. The back is geared for focusing. I have since put on the knobs for focusing. The bellows extend to 60 inches. The back is still in progress, but is being made around Jim Chinn's holders. I machined the front panel to accept Kodak Master lensboards so I don't have to switch any lenses. The entire camera, with exception of this panel, is aluminum. The total weight is just under 40 lbs. The pictures show it on a Ries model A tripod.