I have some probs with this specific paper. After selenium toning & when dry, the paper shows patches of small, white, hexagonal cell-type marks in the emulsion (like honeycomb). I have tried using kodak Rapid Selenium Toner, and Fotospeed selenium toner, both with the same effect. I have tried using wash-aid, not using wash aid (during the pre-toning wash or after or both or neither), long washes, short washes, adjusting fixing times to minimum and very long periods, wash temps, toner temps, toner dilution etc etc etc. None of which has made anydifference - the marks on teh finish are still there - indiscrminate of shadow or highlight, or unexposed. It doesnt cover the whole finish - just patches - and they're not evident until the paper is dry.

This hasnt happened with MGRC warm tone or any other paper I use - any ideas? Ilford have asked me to send some examples to them for their inspection, but before i do, would like to check if anyone here has had same probs ....