Dave, It is a metal cabinet about 6.5' x 3' x 3' with a fan and coil system in the top. On the very top are slots for the replaceable air filter, underneath are baffles to stop direct air from blowing on the negatives hanging below. Underneath the rubber sealed door on the front is an exit vent for the air drawn-in at the top. Inside are rows of hangar brackets at several heights and stainless steel rods that I can adjust among them. On these rods hang my clips, etc. It is very simple, yet extremely useful. Not much problem with dust these days. You can see it way off to the left here in the darkroom portraits page.
Originally Posted by Dave Wooten
Hope this helps,
Last edited by billschwab; 02-20-2006 at 12:18 PM. Click to view previous post history.
Reason: addition of link