I shot and processed a roll of EFKE 25 in 120 format and used Pyrocat HD as my developer. Interesting results to say the least. The film looks like I would expect an ISO 25 film to look -- contrasty, sharp etc. However, before I was done I could see that the emulsion (gel) was beginning to separate from the film base. I used Formulary TF-4 fixer for 4-minutes. Water for stop bath. Distilled water throughout the process. I also noticed that there were several specks of emulsion floating around in the final water rinse. The emulsion appeared to have a very heavy magenta stain that would not fix or wash out. This is now my second roll of this film that has ended up this way. My question is what could I be doing wrong? Thanks for any help.