A Crown will probably work, but you should try one out with the back before purchasing, if you can't find someone who has tested that combination. To get forward front tilt on a Crown, I believe you have to drop the bed, tilt back, and apply front rise to recomopose, or you can reverse the front standard for front tilt, or some people modify the front standard for tilt in two directions. If you drop the bed, you usually increase the minimum focusing distance, so that could be a problem. The front standard on a Crown is kind of small as well, so that can be an issue, if you have large lenses that cover 6x17.

I'd avoid most lightweight wooden cameras, which may have trouble supporting the weight of the large back, but some heavier wooden cameras might work.

I've used it on my Linhof Tech V and Sinar F, and it works fine on both.