Quote Originally Posted by sanking
One of the interesting things I found in testing JandC 400 out was that you can get a higher CI with extreme minimal or semi-stand agitation than with constant agitation. For example, using the 2:2:100 dilution of Pyrocat-HD the CI maxed out at about 0.90 at 17 minutes of development with rotary agitation, whereas with extreme minimal agitation (1:1:150 dilution) the film reached a maximum CI of sligthly over 1.05. But, it also built up quite a bit more general stain with the semi-stand method.

Sandy King
Thanks Sandy, I just checked my curves and a CI of .9 is plenty enough for me. I dont have tubes large enough to do semi stand and frankly I am too impatient to sit around for 45 min waiting...