Just finished overhauling the darkroom. I got rid of the office desk my enlarger was on and built a counter 36' high with a gap with inset rails so my Beseler sits flush with the countertop. Under the enlarger is open to allow doing bigger prints by removing the baseboard and projecting through. I also raised the matting and mounting table to about 36" to make all the work surfaces equal. Then I put a few new shelves in for storing larger boxes of paper. I also mounted a small desk lamp modified with a dimmer and a 7 watt bulb controlled by a timer to do highlight bump exposures as needed.
I think the darkroom will be 100% more functional with these modifications. Heres a few shots to illustrate.
The tennis ball is to protect the scalp from the shelf.