Quote Originally Posted by juan View Post
I use plate glass in my contact printer with no problems. In my
scanner, I use two sheets of non-glare picture frame glass from
the framing shop. I put the dull side towards the negative on both
top and bottom. Cost for two sheets of glass cut 8x10 with buffed
edges was about $10. If you're having Newton's ring problems,
a sheet of this glass might help. It's certainly cheap
enough to try. juan
So you sandwich the negative between two sheets of glare
free glass, both dull sides in contact with the negative. Dull
sides sound bad. Dull yet clear? That glass will need a look.
I'd be laying a glass sheet upon the enlarging paper. Dan