Ok I am getting ready to frame in the walls and putthe roof on and I really need advice on the darkroom size.

I have a 12x24 exterior deminision. And I had the darkroom set to 10x12 leaving me with an office / dry area to mount and cut mats of 14x12 minus the 2x4 and sheetrock.

But when I designe dthe layout I didnt have a bathroom 3x5 and I added it. You never know and I do not wnat ot have to run into the house.

So I want to pick up some room because of the loss. I want to be able to make up to 30" prints. If I moved the wall back to 9 or 8 foot 8x12 or 9x12 would this work?

It would look like this;

*************** -
****12L x 8W**** -
*************** -
*9W***** -*****-

For 8' longer L. I would put the door from the
outside at the L position.

For 9' short L

With the 8 and 9 I would have a slight L shape but with the 10" I would have a rectangle.

The reason is that I already dropped in plumbing and layed the sub-floor today and I am not going to redo it as it is done.

Any advice at this point would bt greatly apprecaited.