Quote Originally Posted by Tom Hoskinson
Yes, IMO it should be possible to put everything together in a single solution.

I was just taking it one step at a time, to see if an Amidol concentrate was feasible at all.

The obvious next step is to try combining everything into a single solution. I got a bit side tracked in this by investigating the amidol debris residue.

Well, I tried adding all of the chemicals to the glycoal at 250F at once, but the result was not satisfactory. Everything appeared to go into solution ok except the sodium sulfite, and it would not go intio solution even after raising the temperature of the solution to over 300F.

If it is possible to mix all of the chemicals in one solution the order of mixing would appear to be important.