Quote Originally Posted by DrPhil
...
Start with the hard developer first. I used dektol. It needs to be strong 1:1 and 1:2 produced identical results. 1:5 did not produce full blacks.
....

The second developer needs to be very dilute. Selectol Soft is normally mixed 1:1. I saw the best results at 1:9. I am going to experiment with even more dilute solutions next.
....
Th efew times I've tried something like this, I found out that it's better to use the soft developer first if you don't have running water for the wash. A little metol in the hard won't hurt it, but a trace of hydroquinone in the soft will make for gallopping contrast.

BTW; I've managed to make MGIV RC very slightly warm by using exhausted G232 at 1:20 dilution... At that point, other papers just didn't develop.