Hi JBrunner,

I just started printing at home in the last year. My setup gets shuttled in and out of the only bathroom (about 5’ x 8’) in my apartment. Setup for prints takes about 5 minutes, for loading film into daylight tanks about a minute. I picked up a couple of vinyl topped 2’ x 4’ folding tables and use one for an Omega B22XL enlarger and one for chemistry trays in the tub. Sitting on the toilet seat, I can reach everything without moving around, and in reality, once the rig is set up, there isn’t anywhere to move to anyway. Making it light tight was pretty easy since there are no windows. Two sheets of matboard butted end to end are velcroed to the door casing with a rolled bathmat at the door’s bottom edge.

It’s not pretty, but it works.

I didn’t know if posting digital snaps here would be a faux pas, so if you are interested, you can see ugly pics of the setup here where I did 11x14 for the first time at home yesterday: http://www.flickr.com/photos/6962148...7603884970987/

Hope that helps,

ignatiu5