Quote Originally Posted by Absinthe View Post
Well, I am not certain why they necessarily need to stand up. But I am sure I will figure that out at some point.
I used the stand I made to hold them vertical when they were "dry". Start with empty tubes in the stand and second stand to hold the caps with their chemicals added. Turn out lights, add film. Upend tube and slip on cap. Into the water bath. Also used the stand at the end to hold the tubes again cap end down to drain a little bit before I removed the caps.


I've since switched to a Jobo. But because mine is the single speed kind, I'm beginning to re-think the switch because I want to play with Pyrocat-HD and so far while it works, I'm thinking perhaps the agitation is a bit to aggressive and I'm oxidizing the developer too quickly. Back to the tubes for 8x10 perhaps.