[RH Designs]

I assume that it would work fine with a Jobo rotary processor, by just dipping the meter inside the basin. Yes, the Jobo would keep the temperature constant but the Meter having memory and steps would make it really useful just as well. Plus, sometimes you are running the Jobo at a higher than normal temperature for one reason or another.

It should still be just as useful with a Jobo, yes. Immersing the probe in the tank as I did with my Paterson tank should also be possible - the cable won't get badly twisted because the Jobo reverses. The only issue I suppose is whether there's enough chemistry in the horizontal tank to wet the probe properly, although the surrounding air ought to be at the same temperature!