Quote Originally Posted by Brian Jeffery View Post
Richard,

I'm currently processing film with inversions at 1 minute intervals, however I'm going to be looking at 3 and 5 minutes intervals for some film/developer combinations. So I would really be interested in the 30 second beeps being variable: either from a predefined list (15 sec, 30 sec, 1 min, 3 min, 5 min) or infinitely variable within specific parameters. I personally think this would make this timer indispensable as it is something that I cannot do with a normal kitchen timer and it would mean that I'm less likely to inadvertently perform an inversion at the wrong time.

Can you confirm that the end of process sound is different to the 30 second beep?


Brian
Currently the device beeps twice on the minute, once on the half minute. Variable beeps I'm afraid are not really practical - there is a time display so you can keep track of the minutes, or if you're tray developing in total darkness with the display covered you could use the cricket umpire method of transferring marbles from one pocket to another in order to keep track of the minutes . The end of step beep is longer than the agitation prompts, and is preceded by a ten second countdown.