Nice shot's really !!
The "dignan" formular does it's job quite well with forgiving low saturated portrait films. Unadjusted I had good results with Agfa Portrait 160 (RIP), but quite harsh prints with consumer stuff. Watch out for the ph, it HAS TO BE adjusted to ~10.05 with sulphuric acid. If you take the formular without corrections, ph will be too causic at about ~10.50, depending on your water supply. Further I suspect that there is too much sulfite and bromide in, the Densitiometer's reading for red are a bit low...
Last edited by stefan4u; 05-23-2008 at 01:34 PM. Click to view previous post history.