Quote Originally Posted by Thomas Bertilsson View Post
I just tried it for sheet film development. I tried what I had shot as test negatives:
1. Ilford Delta 100 4x5
2. Kodak TMax 400 4x5
3. Ilford FP4 5x7
4. Ilford HP5 5x7
The negs all look much better than I had hoped. If I have time tonight when I return home I will scan them to see if my first visual impression is right.
I diluted 1+4 and the full cycle was between 3 and 5 minutes. Next time I'll try 1+10 upon John Nanian's advice. Slow it down a bit, avoid uneven development.

- Thomas
Hi Thomas,
I am a glycin addict and have entered a 2 step program. My deviation on 130 is:

Water (125 degrees F) . . . . . . . . . . . . . 750 ml
Metol . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 g
Sodium Sulfite (Anhydrous) . . . . . . . . . 50 g
Hydroquinone . . . . . . . . . . . . . . . . . . . . . 11 g
Sodium Carbonate (Anhydrous) . . . . . 80 g
1% benzotriazole solution. . . . . . . . . . . . . . . 15 cc
Glycin . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 g
Cold Water to make . . . . . . . . . . . . . . . . 1 liter

I use it at 1+3 72 deg.
Great with Ilford MG wonderful with WT

For Film:
GERMAIN'S FINEGRAIN

water, 125F/52C 700 cc
Metol 7 g
Sodium Sulfite (anhydrous) 70 g
Paraphenylene Diamine (base) 7 g
Glycin 7 g
Distilled cold water to make 1L

Use stock, try your D76 times...Evan Clarke