Quote Originally Posted by George Collier View Post
Dan and Reinhold - thanks for your most helpful responses.
One more question: if you are using a good facing material
(as you describe) do you have to worry about the acid
content of the corrugated material?
By "facing material" you mean the polyester separator
sheets? I can't see that an issue. Pre dried by sponge or
squeegee and placed upon those non-wetting separators
precludes contact with the corrugated board. No more
than water vapor transfers from the prints, through
the boards facing's, and out of the stack. A print
layer with top and bottom separators. Dan