Quote Originally Posted by cblurton View Post
I suggest you take a look at this site. Scroll down and look for a link to "Graflex manuals." You might find something useful:

That manual will help you a lot.. The six screws in back will remove the back (literally, just just the graflok) then you can either unclip the bellows, or unsnag them with a fine flatheat screwdriver.

The clips are easier and cleaner IMHO. There'll be two, one on top and one on bottom securing the bellows the body.

The initial six screws; do not strip them, do not lose them.

Pretty easy once you get the hang of it.