[QUOTE=darinwc;769992]I keep my enlargers covered in plastic so they wont collect dust.. but then when I remove the plastic the dust goes everywhere!

The plastic gets a static charge so it collects dust. Use something else. Make sure your enlarger is grounded. If a three prong plug, check the circuit to make sure the receptacle actually IS grounded. If not, fix it; or take a wire from a metal part of the enlarger to a pipe--preferably cold water pipe. As stated, vacuum everything. And wipe regularly with a damp cloth. You might need to get some filtered air blowing INTO to darkroom to create a positive pressure to keep the dust out.
Use an anti-static brush or cloth on your negs.