Quote Originally Posted by DWThomas View Post
In 2005 I used birch plywood left from a project for a lensboard (the edges had to be milled down to an appropriate thickness). Made a pinhole from aluminum soda can sidewall, using the classic dimple-and-sand technique to outfit a B&J Press.

It worked!

DaveT
Nice job, I'm building an 5 1/2" x 14" pinhole camera out of 1/4" bamboo plywood, may see a very similar shutter on it, that is if you don't mind. Remember World Wide Pinhole Day is April 26th. http://www.pinholeday.org/

Thanks,
Roger Thoms