Just don't mix Farmers together reducer -- use the packets separately(or discard the fixer portion and use your own nonhardening fixer).
And the Ferricyanide is too slow a bleach without the fixer ....
Originally Posted by RalphLambrecht
Dip the print in fixer, squeegee onto a piece of plex, lean the plex, have a hose with water ready- then take a spotting brush with ferricyanide then apply. use water to control. then back in the fix. repeat until happy.
Use fresh fixer; don't reuse from film developing.
Last edited by Don12x20; 05-14-2009 at 01:02 PM. Click to view previous post history.