I spotted an interesting result where ECN-2 motion picture film was processed in C-41 chemistry.

http://www.flickr.com/photos/jonatha...7614573399785/

There is some reticulation but surely that would be caused by temperature issues rather than chemistry.

Overall the results look very good IMHO.

He used:
"Tetenal C-41 kit from B&H and processed according to the supplied directions in a Paterson jobo tank."
"Once the film had dried completely, I took a wet cloth and sihttp://www.cinematography.com/index.php?showtopic=37036&hl=mply wiped off the rem-jet backing. "

There is more written at:
http://www.cinematography.com/index....opic=37036&hl=

Cheers,
Emulsion.