I recently bought another Welta which came with two Rhaco holders that fit the first one, although there's a difference in length, they being a bit short for the first camera.
Dimensions are 100mm wide x 138mm long with a 1mm lip on the long edges. Thumbnails one and two are of a Rhaco short plate.
Thumbnails three, four and five are of an AP Paris film holder that fits the Welta long body, but a slightly tight fit that will probably get a bit better with use and some candle wax on the edges. They have the internal dimensions for a 9x12 plate and not, as I first suspected, an old Imperial size. Overall size is 100mm wide and 150mm long with an edge lip of 1mm.
I also have a Rada rollfilm back that fits the second (short) camera, but because the Rada's got a groove instead of a lip the matching groove on the long body Welta is slightly too thick to accept it. This is a bit of a pita, as the Rada back would centre properly on the long body, whereas it's always a bit too far up on the short one.
Last edited by Farside; 08-21-2009 at 06:09 PM. Click to view previous post history.