[Kami-the-Trout]

No sharpening at all, just Levels adjusted. I had to scan the neg in two parts on my Epson V700, however, and reassemble the image in PS.

My plan is to contact print these, as soon as I update my UV printing system to print the bigger negs.

And the pinhole is not as sharp as a Canon L, for sure; there's some softness. I think I might pick up a zone plate or sieve to try out as well. And perhaps I'll get more pinholeishness with more direct 'in-the'lens' kind of light. Things to play with.

If not, I built a dirt cheap LF 8x20 camera . . .

Here's a link to the 100 per cent size, raw scan of the neg. It's not the best scan, just a quick rough one to get it digital . . .

https://dl.dropbox.com/u/2098000/sunnyside2.jpg